How to Connect Two Computers Via Lan Cable

In this tutorial we are going to show you how to transfer data from one computer to another. We need to PC/Laptop and a lan cable to transfer data.

PC 1

Step1: Go to “Open Networking and Sharing Center“.
Step2: Click on “Local Area Connection“.
Step3: Now click on “Properties“.
Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“.
Step5: Click on “Use the following IP address:” and enter the IP address: as192.168.1.1 and just give a click on Subnet mask. Once done click “Ok” and close it.

PC 2

Step1: Go to “Open Networking and Sharing Center“.
Step2: Click on “Local Area Connection“.
Step3: Now click on “Properties“.
Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“.
Step5: Click on “Use the following IP address:” and enter the IP address: as192.168.1.2 and just give a click on Subnet mask. Once done click “Ok” and close it.

• 
  

Now  two computers are connected. To share files we need to give access to our drives, so follow the commands given below to give access to your drivers.

Step1: Click on “Computer“.
Step2: Right click on driver and then Properties.
Step3: Click on “Sharing” tab and then Advance Sharing and then check out Share the folder
Step4: Click on Permissions to give control on the other PC and once done click “Ok” and close it
Step5: Click Security and then go onto Advance Settings > Change Permissions >Add > Advance > Find Now at bottom click Everyone

If you have any problems then you can watch the video given below or comment below this post

Note: If you share your data via WiFi the data transfer will be 1-2MB and if you share the data via Lan cable the data transfer will be 10-12MB